Electronic Room Thermostat


Please note: We have improved the test/ pairing on the RT310RF thermostat on models produced after 1018 (October 2018). You can check the date by looking for a small sticker with 4 digits on the back of the thermostat.

Please follow the new procedure below:

The RT310RF is factory pre-paired as standard. When you power up the receiver, the RED LED will flash.

To test that the receiver and thermostat are paired, navigate to the Pairing Menu by choosing Menu > Pairing > TEST. This will display ‘TESTING 10’ on the thermostat. If the receiver and thermostat are paired correctly, the RED and GREEN LED’s on the receiver will flash. To exit test mode, press and hold the Menu button for 3 seconds.

If the RED and GREEN LED’s on the receiver are NOT flashing, you will need to Re-Pair the Thermostat and Receiver. To do this, slide the ON/OFF switch on the receiver to OFF and then slide it back to ON. The RED LED will now flash. Now, enter the pairing process by choosing Menu > Pairing > PAIR. You will now see ‘PAIRING 10’ on the screen. When the RED LED’s stops flashing, the Thermostat and Receiver are paired.

You can test this again by following the above process.

The RT310RF is a stylish, simple to install and use wireless RF room thermostat .


  • Switching volt free and 230V
  • Sleep Mode
  • Frost Protection
  • Desk Stand
  • 5 Year Warranty
  • Frequency 868 MHz with 30 metre range
  • Simple Operation
  • 16 amp relay switching


  • Pre-paired wireless communication, so no more dip switches!
  • Contemporary design
  • RF Test Function
  • Easy Installation
  • Receiver manual override switch

Thermostat Supply:

2xAA Batteries

Receiver (RX) Supply:

230V AC 50Hz

RX Rating Max:

16 (5) A SPST

RX Input/Output:

0 – 230V

Thermostat Scale:

5 – 35°C

Thermostat Size (mm):

W-96 H-96 D-27

Receiver Size (mm):

W-96 H-96 D-27


 Neutral connection


Live connection




Switch output




There are no reviews yet.

Be the first to review “RT310RF”

Your email address will not be published. Required fields are marked *

three × 1 =