Description
Please note: We have improved the test/ pairing on the RT310i thermostat on models produced after 1018 (October 2018). You can check the date by looking for a small sticker with 4 digits on the back of the thermostat.
Please follow the new procedure below:
The RT310i is factory pre-paired as standard. When you power up the receiver, the RED LED will flash.
To test that the receiver and thermostat are paired, navigate to the Pairing Menu by choosing Menu > Pairing > TEST. This will display ‘TESTING 10’ on the thermostat. If the receiver and thermostat are paired correctly, the RED and GREEN LED’s on the receiver will flash. To exit test mode, press and hold the Menu button for 3 seconds.
If the RED and GREEN LED’s on the receiver are NOT flashing, you will need to Re-Pair the Thermostat and Receiver. To do this, slide the ON/OFF switch on the receiver to OFF and then slide it back to ON. The RED LED will now flash. Now, enter the pairing process by choosing Menu > Pairing > PAIR. You will now see ‘PAIRING 10’ on the screen. When the RED LED’s stops flashing, the Thermostat and Receiver are paired.
You can test this again by following the above process.
The RT310i is an affordable Smartphone controlled thermostat. It allows you to control your heating from anywhere via your Smartphone, Tablet or PC. Alternatively, it can be used locally as a simple to use up / down thermostat.
FEATURES
- Switching volt free and 230V
- Optional control via Smartphone, Tablet or PC
- Easy to use App
- Pre-paired wireless communication, so no more dip switches!
- Wall or desk mounted thermostat
- Choose to use schedule or control manually
- Adjustable frost protection when the thermostat is off
- Wireless communication test function
- Suitable for heating or cooling applications
- Holiday function
- 16 amp relay switching
- Manual override
- 5 Year Warranty
Thermostat
|
Supply |
2 x AA Batteries |
|
Scale |
5-35°C |
Receiver
|
Supply |
230V RF |
|
Switch Rating |
16(5) Amp SPST |
|
Output |
0 -230V |
Gateway
|
Supply |
2 x AA Batteries |
Ethernet cable included
Mds –
Brilliant product and part L compliant so I’ve just found out same base plate as the 310 non internet model
Dave –
This control is just a connected programable thermostat. You are unable to connect by open-therm or optimize your system in any way. Don’t understand how this devise is boiler plus authorised as the instructions imply.
saluscontrols UK –
The RT310i has Optimised Start. Please make sure the device and the app are on the latest software versions.
Ligita –
In app cant change hysteresis how its says in manual. +\-0.5C as default is too much.
saluscontrols UK –
Please make sure you have the latest versions of the app and device firmware. https://salus-controls.com/ie/apps/
Firmware can be updated through the app.
Emir –
This thermostat works pretty fine especially after firmware update and anabled hysteresis settings.
It is little slow on response after openning the app on phone (needs about 5-10 sec to recive status and comand from or to thermostat) but afer you once figer it out, it is OK.
The main thing that is missing is some statistics chart (in the app or on the web) to see how heating/cooling is used.